The selection of our interlining fabric by the clothing accessories factory basically includes: research according to the properties of fabrics, clothing varieties and design requirements and different parts of the clothing. How to make a reasonable compatibility seems to be a matter for the garment factory, but it is also an important issue for the fusible interlining manufacturer to develop new customers. To choose a suitable fusible interlining, not only should the shrinkage between the cloth and the interlining be close to each other. , But also to understand the characteristics of the clothes and the appearance performance required by the clothes.
Functionality
The performance of the interlining should match the performance of the clothing fabric. From the perspective of clothing materials, the fabric is the protagonist, and the interlining is the supporting role, but it directly affects the wearing effect of the clothing. It is the "skeleton" and essence of a piece of clothing, and should not be simply interpreted as a "backup". The function of modern interlining can be roughly summed up as follows: endow clothing with graceful curves and shapes; enhance the crispness and elasticity of clothing, enhance the three-dimensional feeling; improve clothing drape and fabric feel, and enhance the comfort of clothing; enhance the thickness, fullness and sense of clothing. Thermal insulation; prevent clothing from deforming and keep the original shape after being worn and washed; the role of local reinforcement of clothing. The characteristics of the fabric should be fully considered when choosing the interlining. There are mainly the following three aspects:
1. For heavy fabrics or fabrics with strengthened twists of warp and weft, generally choose a lining with a smaller mesh and a higher coating amount to ensure sufficient peel strength after bonding.
2. For light and thin fabrics, choose a lining with high mesh count and a small amount of coating to avoid glue leakage during bonding and ironing. Under the premise of ensuring the bonding quality, the temperature coefficient of the lining should be appropriately reduced during the bonding process. Energy consumption can be saved, better hand feeling can be obtained, and the yellowing phenomenon caused by high temperature during the bonding process can be solved. Some light fabrics require interlinings of the same or similar colors to match them to avoid color penetration.
3. The elastic fabric should be compatible with the elastic interlining (note: the elastic direction of the interlining should be the same when bonding), so that the clothing is not easy to foam.
Consider the purpose of the clothing. Some garments that need to be washed should choose washable linings. And it should be noted: In China, the cleaning of clothing is mainly water washing, and the adhesion of the interlining will be greatly reduced during the washing process. Therefore, an adhesive interlining with sufficient peel strength must be selected. According to GB/T2664-2001 and GB/T2665-2001 standards, the peel strength of the part covering the adhesive lining should be greater than or equal to 6N/62.5px×250px, and the size of the lining should not change too much after dry cleaning and washing, if the shrinkage is too large , Inconsistent with the shrinkage of the fabric, it will affect the appearance of the clothing. When sewing garments, choose an interlining that is consistent with the heat shrinkage of the fabric, otherwise wrinkles and pleating will occur.
